Search Basic rates Justification Saved

Sign inOpen 3 items free

Rate book

Delhi Analysis of Rates 2023

A Revenin product, revenin.com

Terms Privacy policy

Opening…

Search/Sub head 13/13.114

13.114Melamine polishing on wood work (one or more coat).

Matches DSR 2023

Rate per sqm

138.10

DSR 2023

How this rate is built6 items, 4 additional charges

MaterialMelamine polish

LabourBeldar, Painter

MachineryHire charges of Spraying machine including electric charges

Loading

Water 1%GSTCPOH 15%Cess 1%

View full rate analysis

See every quantity and rate, and the 4 additional charges with the amount each one is worked out on. Change any rate to see the updated cost, then download the complete working as an Excel file.

Sign in and unlock 3 items free See prices

Near this item in the book

13.112.2Old work (one or more coats applied @ 0.83 ltr/10 sqm). · Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade
13.113.1One or more coats with copal varnish · Varnishing with varnish of approved brand and manufacture:
13.113.2One or more coats with spar varnish · Varnishing with varnish of approved brand and manufacture:
13.114This item
13.115Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work.
13.116Polishing in high gloss/matt finish melamine clear polish on wood work in required color/ wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/ grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

Source: CPWD Delhi Analysis of Rates 2023. The rate shown is DSR 2023 item 13.114.

The Delhi Analysis of Rates 2023 is published by the Central Public Works Department, Government of India, and the copyright in it belongs to CPWD. RateAnalyser is not connected with CPWD and does not claim any right in the book. What this site adds is our own work: reading the book, checking its arithmetic, and the tools built on top of it. Always check against the published book before you use a rate in a bill. The Delhi Schedule of Rates 2023 is also published by CPWD, and the copyright in it belongs to CPWD.

14.1.1With cement mortar 1:4 (1 cement : 4 fine sand) · Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.