Providing and applying Self Curing/Curing Free Ready-Mix Plaster of approved brand and manufacturer on new/old surface of walls/ceiling using factory produced, pre-blended, premixed, formulated self-curing/curing free ready-mix mortar, having minimum compressive strength of 6.0MPa, supplied in dry form requiring only the addition of water at the site before start of application. The material shall have self-curing properties eliminating the need for post-application water (curing). The ambient temperature at the time of application should not exceed 40°Celsius *. It should be applied on hacked/uneven background such as bare brick/CC and Block/RCC surface after preparation of surface etc. complete, as per manufacturers specification including applying Portland cement slurry @0.40Kg/Sqm. It shall be applied in two layers, under layer 12mm thick finished with top layer 6mm thick finished in smooth line and level etc. complete. * In case, ambient temperature exceeds 40°C, manufacturer's specification may be followed.