Open the menu
Hide the sidebar
Rate
Analyser
Opening…
Back
Search
/
Sub head 21
/
21.1.1.2
For fixed portion
21.1.1.2
Powder coated aluminium (minimum thickness of powder coating 50 micron)
Matches DSR 2023
Vol 2, pages 1878 to 1879
Rate per kg
530.90
DSR 2023
How this rate is built
9 items, 4 additional charges
Material
Chromium plated Brass screws 20 mm 100, Aluminium T or L sections, Powder coating 50 microns on aluminium sections
Labour
Bandhani, Beldar, Fitter (grade 1), Skilled Beldar (for floor rubbing etc.)
Loading
Water 1%
GST
CPOH 15%
Cess 1%
View full rate analysis
See every quantity and rate, and the 4 additional charges with the amount each one is worked out on. Change any rate to see the updated cost, then download the complete working as an Excel file.
Sign in and unlock 3 items free
See prices
Near this item in the book
20.8.2
Above 50 tonne and upto 100 tonne capacity pile
· Lateral load testing of single pile in accordance with IS Code of practice IS : 2911 (Part IV) for determining safe allowable lateral load on pile :
20.9
Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of Engineer-in-charge.
21.1.1.1
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
· For fixed portion
21.1.1.2
This item
21.1.1.3
Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
· For fixed portion
21.1.2.1
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
· For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
21.1.2.2
Powder coated aluminium (minimum thickness of powder coating 50 micron)
· For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)