9.106.1125x34x24 mm weighing not less than 23 gms

Matches DSR 2023Vol 1, page 605

Rate per each

42.95

DSR 2023

How this rate is built4 items, 4 additional charges

MaterialBright finished or black enameled mild steel screws 25 mm 100, PTMT handle 125x34x24 mm

LabourCarpenter 2nd class

Loading

Water 1%GSTCPOH 15%Cess 1%

View full rate analysis

See every quantity and rate, and the 4 additional charges with the amount each one is worked out on. Change any rate to see the updated cost, then download the complete working as an Excel file.

Sign in and unlock 3 items free See prices

Near this item in the book

9.105.566 mm overall thickness partition using 8 mm thick double skin multipurpose cement bonded wood particle board manufactured as per IS: 14276 with suitable cement bonded board screws · Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture’s specification and direction of engineer in charge all complete.

9.106.1This item

9.106.2150x34x24 mm weighing not less than 26 gms · Providing and fixing PTMT handles with necessary screws etc. complete.

9.107.175x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms · Providing and fixing PTMT Butt hinges with necessary screws etc. complete.

9.107.2100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms · Providing and fixing PTMT Butt hinges with necessary screws etc. complete.