Search/Sub head 9/9.162A.1

Providing and fixing factory made ISI marked uninsulated metal fire rated doorset assembly for all non egress application areas like shafts etc consisting of galvanized iron steel frame and double leaf shutter, including necessary hardware accessories conforming to FD 120 UD classification of IS 3614 :2021 with fire rating of 120 minutes integrity. The door frame and shutter shall be made out of minimum 1.20 mm thick GI Sheet with minimum 120 GSM Zinc coating as per IS: 277. The entire fire rated doorset assembly shall be tested in unlatched condition as per IS 17518 (Part -1): 2022 Frame : The frame shall be of minimum size 90 x 60 mm with grooved profile to take appropriate fire rated smoke seal, having mitred cut joints (self tab/screwed assembled at site) and provided with appropriate reinforcement suitable for taking hardware and flush fixing as per IS: 4351. The smoke seal material shall be of EPDM in accordance with / ASTM E-84 of minimum size 10 mm x 4 mm, fixed within the inbuilt groove or stuck with adhesive on the entire perimeter of the frame. The door frame shall be fixed in all four sides to masonry wall opening with CSK/Hex headed fastener of minimum 8 mm dia size and minimum 80 mm long with 8mm dia polyamide sleeves @ 4 numbers at each on vertical sides (up to 2100 mm height) and 2 numbers each on top and bottom sides. Door shutter: The double skin double leaf door shutter shall be consisting of minimum 46 mm thick and having box like structure, slots cut and holes punched, for fixing hardwares with stiffners as per IS: 16074 including resin bonded honey comb paper core infill material of density 5 kg/cum. Integral astragals to be provided on meeting styles of double leaf door, each on active and inactive leaf. The door shutters shall be mounted on the frame with SS 304 grade ball bearing butt hinges as per EN 1935:2002 or butt hinges as per IS 12817 both, of minimum size 100x75x3 mm @ minimum 4 numbers hinges per door leaf upto 2100 mm / 2400 mm height or as per test evidence, which ever is more, fixed with M6 25 screws. All doors shall be factory prepared for receiving appropriate hardware and provided with necessary reinforcement for hardware accessories. Accessories Hardware : Fire doorset shall be provided with one number fire rated SS304 grade shaft mortise dead lock, one number 50 mm to 80 mm Back Set with minimum 20mm Square forend with allen key including SS304 dead strike plate conforming to IS 16015:2022 /EN 12209. Two numbers recessed flush pull handle (SS 304) of minimum size 40 mm x 120 mm. One number 300 mm long concealed lever action flush bolt (Dye-Cast Stainless Steel Finish) at bottom with SS dust proof socket and one number minimum 300 mm long concealed flush bolt (Dye-Cast Stainless Steel Finish) at top of inactive leaf of double door, as approved by the Engineer-in-charge. Finishing: Both frame and door shutters shall be factory finished with polyester powder coating of minimum 50 microns thick and shall have passed salt spray test as per IS:13871 of approved colour and shade all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge. Installation: The hollow space in the door frame shall be filled / injected with fire rated self extinguishing type polyurethane foam (PUF) after installation at site of work. Rate shall include for complete fire rated door assembly supply and installation by the approoved manufacturer.

9.162A.1Double leaf un-insulated fire rated door of FD 120 UD classification with 120 minutes integrity only as per IS 3614:2021 for non egress application area like shafts etc.

Matches DSR 2023

Rate per sqm

12,657.00

DSR 2023

How this rate is built14 items, 4 additional charges

MaterialFactory made ISI marked 120 minutes fire rated Un-Insulated metal fire rated doorset conforming to FD 120 UD classification of 1.20 mm thick galvanized iron sheet with minimum 120 gsm zinc coating consisting of double skin, double leaf door of minimum 46 mm thick and grooved pressed frame profile of minimum size 90 mm x 60 mm, door leaf having infill material of resin bonded Honey comb Paper core of density 5 kg/cum glued with inner side of sheet of door leaf integral astragals attached to the meeting edge of both leaves including shearing, bending, welding, slots and punching holes, pressing to shape and fabrication in factory etc. including cost of glue and infill material complete., Polyester powder coating of minimum 50 micron of desired color and shade, 120 minutes fire rated SS 304 shaft mortise dead lock, 50 - 80 mm Back Set minimum 20 mm square forend with allen key including SS304 dead strike plate conforming to IS 16015:2022/EN 12209, Recessed flush pull handle (SS 304) of minimum size 40mm x 120mm, Concealed lever action flush bolt (Dye-Cast Stainless Steel Finish) of Length 300mm, at top of inactive leaf of double door, 300 mm long concealed lever action SS flush bolt (Dye-Cast Stainless Steel Finish) at bottom with dust proof socket of the inactive leaf of double door, Stainless steel (SS 304) ball bearing butt hinges 100mm x 75mm x 3mm including M6 25 screws, Smoke Seal of size 10 mm x 4 mm for frame of EPDM, CSK/Hex headed fastners of size minimum 8 mm dia & 80 mm long hot dip galvanized with 8 mm dia polyamide sleeves., 120 minutes fire rated polyurethane foam for grouting in frame

LabourBeldar, Fitter (grade 1)

Loading

Water 1%CPOH 15%Cess 1%GST

View full rate analysis

See every quantity and rate, and the 4 additional charges with the amount each one is worked out on. Change any rate to see the updated cost, then download the complete working as an Excel file.

Near this item in the book

22.27A.2Old work of APP treated on Horizontal surfaces · Providing and spray applying two component hyrbrid polyurea polyurethane waterproofing system at all levels for podium garden waterproofing by the manufacturer or his approved applicator, consisting of the following operations : a) Dismantling and removing the existing APP layer including disposal of malba. b) Grinding the surface to remove clinged APP layer and, dirt, dust, grease etc. and treating the surface as recommended by manufacturer and therafter treated cracks, hold etc surface polymer modified cement mortar or is ponded with water for 24 hours for testing of leakage or seepage . c) Providing and applying by spray or brush, two component solvent free resin / epoxy primer mixed in proportion by volume / weight as recommended by manufacturer over cement concrete surface after 14 days, having consumption from 0.20 to 0.40 kg/sqm depending on the porosity and undulations of the surface. d) Providing and sprinkling sand, as recommended by manufacturer, over freshly laid primed tacky surface @ 0.25 to 0.40 kg/sqm as decided by the Engineer-in-Charge. e) Over sandy surface, providing and spray applying two component hyrbrid polyurea polyurethane coating system, solvent free, mixed in proportion by volume / by weight as recommended by the manufacturer having elongation >400%, Shore A Hardness > 75 ( after 28 days), tensile strength of minimum of 10 MPa as per DIN /ASTM and Tear strength of minimum 30N/mm as per DIN 53515 or minimum 45 N/mm as per ASTM D624 and having dry film thickness of two coats shalll be minimum 1.5 mm and 20 second maximmum gel time / reaction time. f) A layer of non woven polypropylene geotextile of minimum mass / unit area of 120 gsm with an overlap of 50 mm shall be laid over the polyurea/polyurethane coating surface, having minimum tensile strength 2.40 KN/m as per ASTM. g) Providing and laying screed of cement concrete 1:1.5:3 (1 Cement : 1.5 Corase sand : 3 graded stone aggregate 20mm nominal size) of thickness 50 mm h) Providing and laying Dimple drain boards with inbuilt geo textile drainage membrane on top having dimple height of 20-25 mm with weight 120 gsm, no of dimples approximately 400 per sqm, compressive strength not less than 180 kN/m2 laid with minimum overlap of 50 mm of geotextile. Note : If HDPE Drain cells / Drainmats along with a layer of geotextile having weight of 120 gsm and tensile strength not less than 2.40 KN/m as per ASTM D 4595 is provided in place of dimple drain board with inbuilt geotextile, it shall not be paid as extra.

Sign in and unlock 3 items free See prices

22.28A.1

Old work on brick masonry wall · Providing and spray applying two component hyrbrid polyurea polyurethane waterproofing system at all levels for podium garden waterproofing by the manufactureron or his approved applicator consisting of the following operations : a) Dismantling the existing cement plaster of brick masonry wall including disposal of malba. b) 15 mm cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) over a coat of cement slurry @ 2.0 kg /sqm c) Providing and laying coving in concave shape of cement concrete 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) of size 75 mm x 75 mm at the junction of vertical wall and horizontal surface along the length of wall. d) Providing and applying by spray or brush, two component solvent free resin / epoxy primer mixed in proportion by volume / weight as recommended by manufacturer over cement concrete surface in dry condition, having consumption from 0.20 to 0.40 kg/sqm depending on the porosity and undulations in the surface. d) Providing and sprinkling washed coarse sand, as recommended by manufacturer, over freshly laid primed tacky surface @ 0.40 to 0.50 kg/sqm as directed by the Engineer-in-Charge. e) Over primed sandy surface, providing and spray applying two component hyrbrid polyurea polyurethane coating system, which shall be solvent free, mixed in proportion by volume / by weight as recommended by the manufacturer having elongation >400%, Shore A Hardness > 75 ( after 28 days), tensile strength of minimum of 10 MPa as per DIN /ASTM and Tear strength minimum 30N/mm as per DIN 53515 or minimum 45 N/mm as per ASTM D624 and 20 second maximmum gel time / reaction time with minimum 1.5 mm dry film thickness of two coats.

22.28A.2Old work on RCC wall · Providing and spray applying two component hyrbrid polyurea polyurethane waterproofing system at all levels for podium garden waterproofing by the manufactureron or his approved applicator consisting of the following operations : a) Dismantling old plaster including disposal of malba. b) 6 mm cement plastering with cement mortar 1:3 (1 cement : 3 coarse sand) which shall be paid for separately. c) Providing and laying coving in concave shape of cement concrete 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) of size 75 mm x 75 mm at the junction of vertical wall and horizontal surface along the length of wall. d) Providing and applying by spray or brush, two component solvent free resin / epoxy primer mixed in proportion by volume / weight as recommended by manufacturer over cement concrete surface in dry condition, having consumption from 0.20 to 0.40 kg/sqm depending on the porosity and undulations in the surface. d) Providing and sprinkling washed coarse sand, as recommended by manufacturer, over freshly laid primed tacky surface @ 0.40 to 0.50 kg/sqm as directed by the Engineer-in-Charge. e) Over primed sandy surface, providing and spray applying two component hyrbrid polyurea polyurethane coating system, which shall be solvent free, mixed in proportion by volume / by weight as recommended by the manufacturer having elongation >400%, Shore A Hardness > 75 ( after 28 days), tensile strength of minimum of 10 MPa as per DIN /ASTM and Tear strength minimum 30N/mm as per DIN 53515 or minimum 45 N/mm as per ASTM D624 and 20 second maximmum gel time / reaction time with minimum 1.5 mm dry film thickness of two coats.

9.162A.1This item

9.162B.1Single leaf un-insulated metal fire rated door and frame of FD 120 UD with 120 minutes integrity only as per IS 3614:2021 - For non egress application like area shafts etc. · Providing and fixing factory made ISI marked un-insulated metal fire rated doorset assembly for all non egress application areas like shafts etc. consisting of galvanized iron steel frame and single leaf shutter including necessary hardware accessories conforming to FD 120 UD classification of IS 3614 :2021 with fire rating of 120 minutes integrity. The door frame and shutter shall be made out of minimum 1.20 mm thick GI Sheet with minimum 120 GSM Zinc coating as per IS: 277. The entire fire rated doorset assembly shall be tested in unlatched condition as per IS 17518 (Part -1): 2022 Frame : The frame shall be of minimum size 90 x 60 mm with grooved profile to take appropriate fire rated smoke seal, having mitred cut joints (self tab/screwed assembled at site) and provided with appropriate reinforcement suitable for taking hardware and flush fixing as per IS: 4351. The smoke seal material shall be of EPDM tested in accordance with ASTM E-84 of minimum size 10x4 mm, fixed within the inbuilt groove or stuck with adhesive on the entire perimeter of the frame. The door frame shall be fixed in all four sides to masonry wall opening with CSK/Hex headed fasteners of minimum 8 mm dia size and minimum 80 mm long with 8mm dia polyamide sleeves @ 4 number at each on vertical sides (up to 2100 mm height) and 2 numbers each on top and bottom sides. Door shutter: The double skin single leaf door shutter shall be consisting of minimum 46 mm thick and having box like structure, slots cut and holes punched, for fixing of hardwares with stiffeners as per IS: 16074 including Resin bonded honey comb paper core infill material of density 5 kg/cum. The door shutter shall be mounted on the frame with SS 304 grade ball bearing butt hinges as per EN 1935 : 2002 or butt hinges as per IS 12817 both, of minimum size 100x75x3 mm @ minimum 4 numbers up to 2100 mm / 2400 mm height or as per test evidence, which ever is more, fixed with M6 25 screws. All doors shall be factory prepared for receiving appropriate hardware and provided with necessary reinforcement for hardware accessories. Hardware Accessories : Fire doorset assembly shall be provided with one number fire rated SS 304 shaft mortise dead lock, one number 50-80 mm Back Set with minimum 20 mm Square forend with allen key including SS304 dead strike plate conforming to IS: 16015:2022/EN 12209, one number recessed flush pull handle (SS304) of minimum size 40 mm x 120 mm, as approved by Engineer-in-Charge. Finishing: Both frame and door shutters shall be factory finished with polyester powder coating of minimum 50 microns thick and shall have passed salt spray test as per IS:13871 of approved colour and shade all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge. Installation: The hollow space in the door frame shall be filled / injected with fire rated self extinguishing type polyurethane foam (PUF) after installation at site of work. The rate shall be inclusive of complete fire rated door assembly, supply and installation by the approved manufacturer.

9.162C.1Double leaf un-insulated metal fire rated doorset of FD 120 UD classification with 120 minutes integrity only as per IS 3614:2021 - For egress application like utility room and service area etc. · Providing and fixing factory made ISI marked un-insulated metal fire rated doorset assembly for all egress applications areas like utility rooms and service areas consisting of galvanized iron steel frame and double leaf shutter including necessary hardware accessories, conforming to FD 120 UD classification of IS 3614 :2021 with fire rating of 120 minutes integrity. The door frame and shutter shall be made out of minimum 1.20 mm thick GI Sheet with minimum 120 GSM Zinc coating as per IS: 277. The entire fire rated doorset assembly shall be tested in unlatched condition as per IS 17518 (Part -1): 2022 Frame : The frame shall be of minimum size 90 x 60 mm with grooved profile to take appropriate fire rated smoke seal, having mitred cut joints (self tab/screwed assembled at site) and provided with appropriate reinforcement suitable for taking hardware and flush fixing as per IS: 4351. The smoke seal material shall be of EPDM tested in accordance with ASTM E-84 of minimum size 10x4 mm, fixed within the inbuilt groove or stuck with adhesive on the entire perimeter of the frame. The door frame shall be fixed in all three sides to masonry wall opening with CSK/Hex headed fasteners of minimum 8 mm dia size and minimum 80 mm long with 8mm dia polyamide sleeves @ 5 numbers at each on vertical side and 3 numbers on top side. Door shutter: The double skin double leaf door shutter shall be consisting of minimum 46 mm thick and having box like structure, slots cut and holes punched for fixing of hardware with stiffener as per IS 16074 including Resin bonded honey comb paper core infill material of density 5 kg/cum. Each door leaf shall be provided with vision panel, having maximum area of 0.12 sqm, of 120 minute fire rated minimum 6 mm thick clear borosilicate glass pane fixed with clip-on arrangement and fire rated ceramic tape having minimum size 13x2mm to be fixed all around the glass on both the sides. Integral astragals to be provided for double leaf doors on the meeting style each on both active and inactive leaf. The door shutters shall be mounted on the frame with SS 304 grade ball bearing butt hinges as per EN 1935 : 2002 or butt hinges as per IS 12817 both, of minimum size 100x75x3 mm @ 5 numbers hinges per door leaf upto 2400 mm height or as per test evidence, which ever is more, fixed with M6 25 screws. All doors shall be factory prepared for receiving appropriate hardware and provided with necessary reinforcement for hardware accessories. Hardware Accessories: Fire doorset shall provided with one number fire rated SS 304 grade Mortise dead lock, 50-80 mm Back Set, minimum 20 mm Square forend with allen key Escutcheon of Stainless Steel, and 65/70 mm cylinder with both side key conforming to IS: 16015:2022/EN12209, two pair of D type Pull handle of SS 304 grade of minimum 22 mm dia Centre to centre distance of 300 mm back to back fixing with spindle, one number 300 mm long Concealed lever action flush bolt (Dye-Cast Stainless Steel Finish) at bottom with SS dust proof socket and one number 600 mm long Concealed lever action flush bolt (Dye-Cast Stainless Steel Finish) on top of inactive leaf of double door. Two number fire rated surface mounted heavy duty door closer of size EN 3-5 with standard arm, of desired finish conforming to IS 3564/EN 1154. Finishing: Both frame and door shutters shall be factory finished with polyester powder coating of minimum 50 microns thick and shall have passed salt spray test as per IS:13871 of approved colour and shade all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge. Installation: The hollow space in the door frame shall be filled / injected with fire rated self extinguishing type polyurethane foam (PUF) after installation at site of work. The rate shall be inclusive of complete fire rated door assembly, supply and installation by the approved manufacturer.

9.162D.1Single leaf un-insulated metal fire rated doorset of FD 120 UD classification with 120 minutes integrity as per IS 3614:2021 - For non egress applications like utility room and service area etc. · Providing and fixing factory made ISI marked un-insulated metal fire rated doorset assembly, for all egress applications areas like utility rooms and service areas etc., consisting of galvanized iron steel frame and single leaf shutter including necessary hardware accessories conforming to FD 120 UD classification of IS: 3614:2021 with fire rating of 120 minutes integrity. The door frame and shutter shall be made out of minimum 1.20 mm thick GI Sheet with minimum 120 GSM Zinc coating as per IS: 277. The entire fire rated doorset assembly shall be tested in unlatched condition as per IS 17518 (Part -1): 2022 Frame : The frame shall be of minimum size 90 x 60 mm with grooved profile to take appropriate fire rated smoke seal, having mitred cut joints (self tab/screwed assembled at site) and provided with appropriate reinforcement suitable for taking hardware and flush fixing as per IS: 4351. The smoke seal material shall be of EPDM tested in accordance with ASTM E-84 of minimum 10 x 4 mm, fixed within the inbuilt groove or stuck with adhesive on the entire perimeter of the frame. The door frame shall be fixed in all three sides to masonry wall opening with CSK/Hex headed fasteners of minimum 8 mm dia size and minimum 80 mm long with 8mm dia polyamide sleeves @ 5 numbers at each on vertical side and 2 numbers on top side. Door shutter: The double skinned single leaf door shutters shall be consisting of minimum 46 mm thick and having box like structure, slots cut and holes punched, for fixing of hardwares with stiffners as per IS: 16074 including resin bonded honey comb paper core infill material of density 5 kg/cum. Door leaf shall be provided with vision panel, having maximum area of 0.12 sqm, of 120 minute fire rated minimum 6 mm thick clear borosilicate glass pane fixed with clip-on arrangement and fire rated ceramic tape having minimum size 13x2 mm to be fixed all around the glass on both the sides. The door shutter shall be mounted on the frame with SS 304 grade ball bearing butt hinges as per EN 1935 : 2002 or butt hinges as per IS 12817, of minimum size 100x75x3 mm @ 5 numbers hinges upto 2400mm height or as per test evidence, whichever is more, fixed with M6 25 screws. All doors shall be factory prepared for receiving appropriate hardware and provided with necessary reinforcement for hardware accessories. Accessories Hardware : Fire doorset shall be provided with one number fire rated SS 304 grade mortise dead lock, 50-80 mm backset with minimum 20 mm square forend with allen key including Escutcheon of stainless steel (SS304) with 65/70 mm cylinder both side key conforming to EN:12209 / IS 16015:2022, one pair of D type pull handle of stainless steel (SS304) of minimum 22 mm dia centre to centre distance of 300 mm back to back fixing with spindle, one number 120 minutes fire rated surface mounted heavy duty door closer of size EN 3-5 with standard arm of desired finish conforming to IS: 3564/EN1154 Finishing: Both frame and door shutters shall be factory finished with polyester powder coating of minimum 50 microns thick and shall have passed salt spray test as per IS:13871 of approved colour and shade all complete as per manufacturer's specifications and as per direction of the Engineer-in-charge. Installation: The hollow space in the door frame shall be filled / injected with fire rated self extinguishing type polyurethane foam (PUF) after installation at site of work. The rate shall be inclusive of complete fire rated door assembly, supply and installation by the approved manufacturer.