MaterialStone Aggregate (Single size) : 20 mm nominal size, Stone Aggregate (Single size) : 10 mm nominal size, Portland Cement (OPC-43 Grade), Coarse sand (zone III), Fine sand (zone IV), Structural steel such as tees, angles channels and R.S. joists, Flats exceeding 10 mm in thickness, Mild steel plates, Mild steel rivets, M.S. 20 mm dia holding down bolts, Carriage of Stone aggregate below 40 mm nominal size, Carriage of Coarse sand, Carriage of Steel, Carriage of Cement, Carriage of Fine sand (1 part of badarpur sand: 2 parts jamuna sand), Red oxide Zinc chromate primer, Wall form panel 1250x500 mm, Corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, Double clip (bridge clip), Single clip, M.S. tube 40 mm dia
LabourBandhani, Bhisti, Blacksmith 2nd class, Beldar, Coolie, Fitter (grade 1), Mason 1st class, Mason 2nd class, Mason (for ornamental stone work) 1st class, Painter, Skilled Beldar (for floor rubbing etc.), Mason (average)
MachineryHire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper, Vibrator (Needle type 40 mm)
Built from4 other items in this book
LoadingWater 1%GSTCPOH 15%Cess 1%